| home | |||||||||||||||||||
|
|
| neck straps — horizontal — lug-mount |
Cameras not included with neck straps.
black
leather/green thread
| The horizontal neck strap attaches to both lugs, with the included 1/2" split rings, and holds the camera with the traditional horizontal orientation. All horizontal lug-mount neck straps are US$27. |
See attaching
the o-ring strap bumper to a slot attachment.
| Colors |
Your choice of 1/4" wide natural, russet, dark brown, or black leather with black, gray, white, red, green, blue, yellow, light brown, brown, dark brown, raspberry, turquoise, orange, and hot pink .040" (1mm) diameter waxed heavy-duty cord. Check out the Colors page. |
| Neck Pads |
My neck straps will support pretty heavy loads but sometimes our necks won't. The straps work fine for lighter cameras but, for those heavier cameras, I have neck pads. These pads are 1" wide and 8 3/4" long for good support. The edges are beveled. They are the same leather as the straps and are available in the same colors. If you want a neck pad, it must be ordered with the strap. Neck pads are an additional US$13. See the Neck Pad page. |
| Strap Bumpers |
A pair of strap bumpers are an additional US$2 for the O-ring Strap Bumper and US$8 for the Octagonal and Integral Strap Bumpers. I think that, because of the range of motion of a neck strap, the Integral Strap Bumper or the O-ring Strap Bumper would be the best choice.See the Strap bumper page for more information. |
| Figuring out the length |
My neck straps are not adjustable so specify the length desired. I made my own 45 inches long. You could get two for those times you are shooting with two lenses — one strap shorter than the other. I will need the length of the strap you want measured from end to end. Centimeters or inches will work. Just let me know the unit of measure.
|
| Order |
|
Add a neck pad. |
|
Add strap bumpers. |
|